Your Sump Pump Maintenance Checklist

Heavy rains are a real threat to your home’s basement. A sump pump is your protection from flooding. At Inception Plumbing, we’re the trusted provider of sump pump services in Kansas City, MO. Here are four ways to maintain your sump pump.

Remove Debris from the Basin

Small pebbles, silt, and other debris can get into the sump pump’s basin. That debris raises the water level. The higher water level will trigger more pump cycles, which could wear out the pump and necessitate a sump pump replacement.

Clean the Weep Hole

The weep hole is on the side of the sump well. It can get clogged with muck. If it’s clogged, water can drain into the sump. If it gets obstructed, you’ll need a plumber in Kansas City, MO, from Inception Plumbing to clear it with an auger.

Inspect the Check Valve

The check valve is at the top of the pump motor. It allows you to make sure the pump is ready to cycle. You can adjust the valve’s level, as well. If the motor won’t respond, you may need a new and professional sump pump installation, courtesy of our team here at Inception Plumbing.

Test the Battery

A severe rainstorm, ice storm, or wind event could knock out power to your home. Sump pumps typically operate with electricity, and they won’t work if the power goes out. This leaves your home vulnerable. Having a sump pump backup system is a wise choice. The backup operates on battery power, which lasts for up to 48 hours, usually long enough for power to be completely restored.

Sump pumps are a key part of protecting your home. It’s important to spend a few minutes each month maintaining them. To learn more about sump pump maintenance, contact us at Inception Plumbing today.